Recent content by Rapture

I found some brackets missing in the interior of the car when I took it out to do soundproofing. There was one missing on the driver's side. I would call a parts dept (Gator) and have them check to see what type of bracket is supposed to be there for that rivet to press in to. I can't copy the...

Honestly, I kind of like the look of these mats better than the one that cover the sills.

Interesting, I had gotten mine off a while back, but it took me hours and there is still a slight residue. I honestly thought I was going to ruin the Alcantara, but that stuff is tough. The U.S. stickers have been much harder to remove. Did you receive your car recently? Yous should post some...

What country are you in?

It's possible that piece is not clipped in properly. I had that area apart recently and it is difficult to properly "click" the clip into the trim piece behind it. While I had the rear trim panels off, I also found some screws that were loose and a missing bracket that a piece of trim is...

Hi jpl29, I decided to use products from Second Skin Audio. I used the following: Damplifier 1 MM on the doors and inside rear quarter area – 20 Sq Ft total https://www.secondskinaudio.com/sound-deadening/damplifier Damplifier Pro 2 MM on the rear bulkhead – 4 sheets total...

First, you can remove that white paper on each piece. I's just a protective wrap that someone did not remove. Also, did you attach the power to the lug in that fuse box versus running it to the battery? if so, it's possible that connection is impeding the lower plastic piece when you try to...

This has been a great thread. I finally completed adding the sound deadener and insulation to my car. It's been apart for weeks. My issue was I wanted the bass to sound consistent and it had not prior. I preferred not to add an external sub although this post has proved that the Kicker (and...

you could try to loosen the 3 bolts holding the fuse box in place and raise it a bit. That may provide more clearance. If that does not work, post a picture of your situation. I think you want that lower piece on as it protects anything from coming in contact with that live main power wire.

The lower triangular piece needs to be removed first. There is a tab on that piece that needs to be pressed to remove it.