Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Maybe a bit premature, but has anybody hardwire installed a radar detector or have knowledge of such? Looking to see whether mirror taps, or fuse box taps have been successfully implemented and, if so, how.
Thanks so much for that.. I use a Uniden detector and there is, indeed, a usb cable that would work perfectly!Welcome to the forum @boostm3! Not sure if anyone has hardwired one yet, but there is a USB port up near the rearview mirror. We have a lengthy thread about dashcam wiring and mounting that might help. It's been years since I used a radar detector, so not sure if the modern ones can be powered by USB.
![]()
The Uniden R series won't power on via 5V USB, that's only used for firmware etc. Like Karl mentioned you'll need USB 5V to RJ11 12V step up if you want to do that, or hardwire to ACC in the fusebox.Thanks so much for that.. I use a Uniden detector and there is, indeed, a usb cable that would work perfectly!
Others have reported it not working very well, good luck!I'm going to give this 5-12v one a try.. They have a 1.6ft version that looks tidy. Ordered.
![]()
Amazon product ASIN B0C9TKJ846Its not letting me past the url, but its :
- ASIN : B0C9TKJ846
Ah, ok bummer. I'll follow up in a week.. maybe ill just make my own.Others have reported it not working very well, good luck!
Cool, good to know!Credit another forum member this is the switch hot. I needed to run V1G2
View attachment 38960
Thank you for the link. I just placed my order (I also have a V1 2nd gen).Just received this 5v-12v USB adaptor (12" cord) yesterday and it appears to work just fine with my Valentine 1, Gen 2. I had seen reports of these types of adapters not providing enough juice to work properly but so far so good. The V1 has a companion app that shows current voltage to the detector and it read 11.99v when I checked. Used it for an hour and a half yesterday and it appeared to work normally with no reboots or odd behavior that I noticed.
![]()
5V USB Type A to 12V RJ11 Escort / Valentine / Uniden Radar Detector Power Cord - Universal
5V USB to 12V RJ11 Power Cable Plug and Play Solution to Power Many Radar Detectors Aides in cleaning up installations 12www.stickerfab.com
Not related to the seller, etc., took a week and a half to arrive in Southern CA.
Mine is still going strong. No issues…Thank you for the link. I just placed my order (I also have a V1 2nd gen).