Need help installing eventuri intake

[Emira123]

I’m trying to install the intake and when I get to the part on their “how to” that says to remove the “loom” from the airbox, I don’t understand how to do that when the loom is zip tied to the stock airbox. Can someone show me a video of this? Every video I’ve seen they skip over this part and eventuri doesn’t really show you how to do it either.

 

[Eagle7]

If I remember right, the loom is zip-tied to clips that pry off just like the instructions say. It's been just long enough that I can't exactly remember now. Can you post a picture of them?

 

[silent cilantro]

The loom has clips that are zip tied to it. Those clips slide onto tabs around the air box. You may have to pry those clips open a little because they are designed to push in and bit against the tabs.

 

[Tomwa]

In my experience, it's a bit of a squeeze but get rid of the rubber coupler/hose going to the throttle body.

This will give you room once you undo some bolts, or split the air filter housing to move things and you can get a bit of wiggle room, as you unclip each of the loom fixtures you'll get more and more room.

The airbox itself can be a bit of a game to get out itself. There are probably a few other things you could remove/loosen to make it easier.