sorry for delay, have been out for a bit. I buy from distrib that I have a wholesale business account with.Where did you find them at that price?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
📸 We've added a new feature to the site, the Showcase! You can check it out at this link: EmiraForum.com Showcase
🖼️ You can read a bit more at the announcement thread as well: Showcase -- an upgraded Journal
sorry for delay, have been out for a bit. I buy from distrib that I have a wholesale business account with.Where did you find them at that price?
Did you use any shims, or have any isuue with noise?We have the exact same positive experience. I wish the car had come with the Hawk Ceramics from the factory.
noDid you use any shims, or have any isuue with noise?
Kitkat any word on the ebc brakes? Looking at the Hawk due to the extreme dust from oem. The ebc would be a more economical choice, but I still want the low dust.I’ll be able to compare the hawk ceramics with the ebc reds soon.
Kitkat any word on the ebc brakes? Looking at the Hawk due to the extreme dust from oem. The ebc would be a more economical choice, but I still want the low dust.
Really appreciate you journal and 3D print files. thank you
Installation on the Hawks was straightforward, bedding was achieved very quickly. Cooldown and then subsequent performance test puts them about even with the EBC red. Pedal feel is pretty much the same as EBC red as well. Won’t be able to report back on dust until later but I didn’t see much dust after 2 drives. The only noises I’ve heard so far were during bedding and going into reverse as the pads up front made a clunk, not a big deal there. I’ll note my fronts came with no backing plates and my rears did for whatever that’s worth. The pad fitment in the rear is better than the EBC Red and shouldn’t cause a lip overhang.
Looking like a good overall street pick.
Are the hawk pads worth the $150-$200 premium over the EBC pads?
Buying directly from Hawk I’m looking at $500 but the EBC from GRP run about $300
Has anyone told EBC this ?The EBC Red were always a little noisy but otherwise performed fine, I think maybe the backing plate being slightly off and the pad material being 2mm off may have contributed to that noise in the rear. Maybe EBC should be taking this as feedback.
I did contact EBC USA with measurements and photos. They were responsive with their own validation of my measurements and what I received. I also submitted the pictures of two other Emira owners with the similar issue. A vendor commented, separately, that this has been the case on the Evora but that it's not caused any mechanical issues; this vendor also runs the Reds on their cars (I saw it on one of their cars in person).Has anyone told EBC this ?
How long did it take to get to you from Canada? About to put my order in but do not want to wait a month on customsIf anybody is looking for a set https://eurosporttuning.com/ $395 shipped with code EST1
Just placed my order. Really wanted the Hawk pads and EuroSports price brings the price down just enough. thank you for the codeOrdered on the 28th arrived on the 3rd. It actually shipped from OH. First time ordering from them so YMMV. Best deal I've seen so far though is from Fidanza for $296 + shipping with code summer24