Everyone's Mod Priority List

[Sandalwood]

1. PPF (done)
2. Black badges (done)
3. Luggage set (done)
4. Magnetic drain plug (done)
5. Wireless charging tray (en route)
6. Key cover
7. Order cat delete to install post-warranty
8. Radar detector
9. Dash cam
10. Change exhaust tips (silver for black)
11. Swap wheel logo color for black

 

[Tomwa]

I guess I need to start with mods that I've done. Then continue the wish-list

1. 3rd Cat Delete
2. Intake
3. Tint & Windshield
4. Carbon bucket seats
Enjoy in this form for a while

5. Track 18s or 19 Wheels
6. Track pads
7. Carbon Front Splitter
8. Carbon Wing
9. Possibly some Nitrons or similar

 

[Pegasi]

1. Tint (Done)
2. PPF (Done)
3. Ceramic Coating (Done)
4. Built In Laser Jammers (Done)
5. Witamats (Received but not installed)
5. Llagos Pista Light Weight Wheels (Ordered)

Future
6. Low Dust Pads

Nothing else planned. Decided against exhaust, 3rd cat delete, powder coated supercharger cover.

 

[Sandalwood]

1. Tint (Done)
2. PPF (Done)
3. Ceramic Coating (Done)
4. Built In Laser Jammers (Done)
5. Witamats (Received but not installed)
5. Llagos Pista Light Weight Wheels (Ordered)

Future
6. Low Dust Pads

Nothing else planned. Decided against exhaust, 3rd cat delete, powder coated supercharger cover.

I wanted to do laser jamming, but even though I live in a state with remarkably few laws (Tennessee) where I can still have passengers with an open container in the vehicle, laser jammers are specifically illegal. It's weird.

Incidentally, @Pegasi , what system did you go with? And is it...visually unobtrusive? Stealthy, even?

 

[Pegasi]

I wanted to do laser jamming, but even though I live in a state with remarkably few laws (Tennessee) where I can still have passengers with an open container in the vehicle, laser jammers are specifically illegal. It's weird.

Incidentally, @Pegasi , what system did you go with? And is it...visually unobtrusive? Stealthy, even?

Hey Sandalwood. Technically it's a Laser Shifter, not a Jammer so they may be legal in TN.

I did a Escort Redline Ci 360c. You can see the three shifters on the nose. Look right under the lip of the nose under the Lotus logo. They are about 1 1/2 inches wide. Not to bad. There are also three in the back.

 

[zoomtt]

My List

1. PPF - DONE
2. Wheels - DONE
3. Lowering - DONE
4. Weighted Shift knob - DONE
5. GRP Front Splitter - DONE
6. CT Carbon rear duckbill - DONE
7. CT carbon rear diffuser - Ordered
8. GRP Sideskirts -
9. Carbon Roof PPF - DONE
10. Intake -
11. 3rd cat delete - DONE
12. Valve controller - DONE
13. Forged Carbon Engine trim - DONE
14. dashcam -
15. floormats-

 

[Gprodigy]

I'm Curious what everyone's Mod Priorities are from when they get the car.

I'll start it off.

1. Wrap
2. Tint
3. Exhaust
4. Engine Surround Cover (carbon fiber surrounding)
5. seat belt color match
6. (custom engine louvers as wish list)

1. Wrap exotic green - HOLD Seneca blue is getting too much love right now to disappoint lol
2. Tint - DONE
3. Exhaust - DONE
4. CF Engine Surround Cover -
5. seat belt color match -
6. Engine louvers - waiting on more options
7.PPF - DONE
8. GRP lowering sleeve - DONE
9. GRP Spacers - DONE
10. GRP short Shifter - Ready for install
11. Underglow + Vent lighting - DONE ( and Awesome )
12. Rear Diffuser Extensions -

 

[crashprash]

1. PPF (completed by dealer) DONE
2. Tint and interior protection (completed) DONE
3. PPF interior plastic trim (completed) DONE
4. Hardwired dashcam (fitted) DONE
5. CF engine cover (fitted) DONE
6. Powerflex transmission mount inserts (to be fitted) DONE
7. Aerie short shifter, exhaust, heat wrapped y-pipe (on order) DONE
8. Track/Street brake pads TO BE FITTED
9. Wheels and semi-slick tyres
10. CF lip kit and spoiler
11. Aerie heat wrapped decat headers (once warranty ends)

Unplanned mods
Miltek MVC, 3rd cat delete, Eventuri intake, ZL1 towhook, Raceseng shift knob, witamats custom floor mats, snapshades

 

[Speedy Emira]

What's done:
Aerie lightweight wheels
Full PPF and decals
Nitron fast road shocks
Carbon engine surround
GRP hub centric spacers
GRP quick shift
Miltek full exhaust with valve controller
3rd cat bypass pipe

Planning to do:
Tillett seats
Eventuri intake
JUBU front splitter and swan neck wing
JUBU 600 build with DCT, or stick to manual with the 500 build and uprated clutch and differential

 

[Speedy Emira]

1. Wrap exotic green - HOLD Seneca blue is getting too much love right now to disappoint lol
2. Tint - DONE
3. Exhaust - DONE
4. CF Engine Surround Cover -
5. seat belt color match -
6. Engine louvers - waiting on more options
7.PPF - DONE
8. GRP lowering sleeve - DONE
9. GRP Spacers - DONE
10. GRP short Shifter - Ready for install
11. Underglow + Vent lighting - DONE
12. Rear Diffuser Extensions -

Do you have any pictures of the lighting you have done?

 

[ADC]

ok, despite telling myself I was going to abstain from modding this car for as long as possible, I'll finally bite

Done:
- PPF & ceramic coat (Xpel stealth all over, colour-change roof via Xpel gloss black film, Xpel gloss black on all existing black bits)
- Aerie V2 lightweight wheels (custom offsets)

Sitting In My Black Friday Shopping Cart :
- GRP short shifter
- GRP 3rd cat delete pipe
- Physical steering wheel buttons

Probably Sooner Than Later:
- Racing Brake street pads (begone, damn brake dust!)

Feeling Likely At Some Point Later On:
- Antigravity battery
- Tillet seats

 

[allenyao09]

1. PPF - DONE
2. window tink- DONE
3. floormats- DONE
4. dashcam - DONE
5. Rock guards - DONE
6. 3rd cat delete - in cart
7. Valve controller - in cart
8. high-flow intake filter - in cart
9. GRP 12mm Spacers
10. Carbon fiber bits
11. Lowering - maybe?
12. Another set of tires for winter? The cup2s are so slippery in wet
13. Low dust brake pads
14. Antigravity lightweight battery - on my wish list
15. Tillet seats - on my wish list

 

[Time2Fly]

Custom painted sills installed
Tires swapped and cold weather wheels/tires mounted
Titanium exhaust installed
Dashcam installed
Carbon aero kit and engine cover installed
PPF and exterior/interior ceramic treatment
Eventuri
Seat belts?
JUBU / OEM ECU?

: done by me
: done by someone else

 

[MPD]

Carbon Fiber surround - done
Color change on supercharger cover - done
Window tint - done
Uniden R8 - done
Miltek valve controller - received not installed
3rd cat bypass pipe - received not installed
Carbon fiber rockers - received not installed
Carbon fiber splitter - received not installed
Carbon fiber wing - stuck in customs
Paint correction and ceramic (incl wheels) - I will be doing during winter break

 

[Ethnic6]

PPF
carbon fiber paddle shifter
exhaust
air intake
I'm also curious to see if anyone can mod the AMG engine.

 

[Gprodigy]

Do you have any pictures of the lighting you have done?

Here you go, they are fully customizable and animated from the phone (see video). They're installed in a way so that it doesn't show any hotspots or LED pixels. They're as bright as a it looks below. When off, it looks like a blue emira lol

 

[GlobalPilot777]

1. Front PPF - DONE
2. window tint - DONE
3. 3rd cat delete - DONE
4. Valve controller - DONE
5. high-flow intake filter - DONE
6. 12mm Spacers - DONE
7. Lowering kit - DONE
8. Short Shift - DONE
9. Seatbelt change to yellow - DONE
10. Gear gaitor in alcantara with yellow stitches - DONE
11. Arm rest changing to alcantara with yellow stitches - UNDER PROCESS by Hide&Seam
12. Rear Wing - SHIPPED awaiting installation
13. JUBU440 installed and removed, shit product for too much money! - Looking for other options
14. Change color with wrap - Wrap on order waiting to install
15. Tillett seats quotation in - waiting to sit or test one before final call to order
16. Full system headers + y-pipe - waiting for another ecu product to order this

Follow my mods here in instagram: theflyingstig