USA/Canada Delivery Thread

Should I put my V1 up for sale? Anybody a buyer here? :geek: Save on the BAT fees.
 
Car arrived via truck this morning. Was only able to put 50 miles on her before I had to go back to work, but man, it was worth the almost 3 year wait. I'm ecstatic.

mJFL952.jpg

L4A7Ieo.jpg

NIDnWBt.jpg

ryaVtYR.jpeg



Unfortunately after looking back through the pics I took it looks like the front driver's brake has the uneven wear problem. It only had 15 miles on when I took them so I'm hoping when I go and look later it may have corrected itself... but that's wishful thinking...
I have the same brake issue with my left front only it looks worse than yours at about 40% unswept. Have not looked at the reverse side of the rotors to see if there’s any evidence there, might do that this weekend. My car sat out from the 12/29/23 shipment in Baltimore until I picked it up on 4/13/24. Today I tried a few hard braking exercises but did not seem to change anything. Braking seems excellent with straight line stops from 60mph. FE2 with only 317 miles on the car so maybe it’s going to free up with more use, if not, then its warranty time.
 

Attachments

  • IMG_0522.jpeg
    IMG_0522.jpeg
    270.4 KB · Views: 117
I have the same brake issue with my left front only it looks worse than yours at about 40% unswept. Have not looked at the reverse side of the rotors to see if there’s any evidence there, might do that this weekend. My car sat out from the 12/29/23 shipment in Baltimore until I picked it up on 4/13/24. Today I tried a few hard braking exercises but did not seem to change anything. Braking seems excellent with straight line stops from 60mph. FE2 with only 317 miles on the car so maybe it’s going to free up with more use, if not, then its warranty time.
No need to wait. Your pad is missing a chunk. Might as well get it replaced now.
 
No. Seller pays 99 for basic listing, 500 for advanced, and then a shit ton for white glove service.

Wow, never knew that. I used to run an auto brokerage and bought/sold tons of cars using online platforms. This was before BaT though.. I'm used to eBay Motors. Surprised the buyer pays the fees with BaT. Whatever works! 🤷‍♂️
 
I have the same brake issue with my left front only it looks worse than yours at about 40% unswept. Have not looked at the reverse side of the rotors to see if there’s any evidence there, might do that this weekend. My car sat out from the 12/29/23 shipment in Baltimore until I picked it up on 4/13/24. Today I tried a few hard braking exercises but did not seem to change anything. Braking seems excellent with straight line stops from 60mph. FE2 with only 317 miles on the car so maybe it’s going to free up with more use, if not, then its warranty time.
From what I understand, this is a common issue for the cars that were sitting. Brake pads freezing/welding to the rotor and then partially breaking off when unstuck. In fact, my friends DV that we are picking up on Monday had this issue at the dealer and was spotted during Dealer PDI before delivery. They were able to get the parts overnighted by Lotus and make the repair. All repaired and ready for pickup.

I would get it in ASAP and have them confirm and repair.
 
They did confirm they are not using precut will be putting the car in service mode to make it flush for the hood, and will be removing emblems.

They also said they were cutting the film larger to give more room to work with, and that they would not be removing the rear lettering but they would be cutting around the letters and not a square.

Those were the issues I had with my current wrap and the manager was pretty upset hearing about the issues I had and was happy to have me come in to get the other one looked at (but distance and it being used wasn't super on the top of my mind).

For what it's worth.
 
Make them sign a letter saying if they drill the bumper they owe you $5k to get their attention.

This is the way.
Ordered!
 
I have the same brake issue with my left front only it looks worse than yours at about 40% unswept. Have not looked at the reverse side of the rotors to see if there’s any evidence there, might do that this weekend. My car sat out from the 12/29/23 shipment in Baltimore until I picked it up on 4/13/24. Today I tried a few hard braking exercises but did not seem to change anything. Braking seems excellent with straight line stops from 60mph. FE2 with only 317 miles on the car so maybe it’s going to free up with more use, if not, then its warranty time.
What am I looking for here? Is it the discolored brownish "rust" on the rotor to indicate something isn't right?
 
What am I looking for here? Is it the discolored brownish "rust" on the rotor to indicate something isn't right?

Notice how only some of that brake disc is clean? That's the only part of the brake pad that is making contact with the rotor.
 
Spoke to Boardwalk, they have 16 Emiras currently and 5 more coming in today. More than half of them have A/C issue not blowing cold. They now have 20 resistors ordered from Lotus to replace them.

They would initially blow cold but after test driving them, they found most of them starts blowing only hot air

Oh! And they haven't received their first deposited car. Basically the trucks are just grabbing whatever they see at port lol
 
Last edited:
My car was on the 4/6 ship and still hasn't arrived at Lotus in NJ. Dealer's PPF installer will be there midweek, so hopefully it arrives
Spoke to Boardwalk, they have 16 Emiras currently and 5 more coming in today. More than half of them have A/C issue not blowing cold. They now have 20 resistors ordered from Lotus to replace them.

They would initially blow cold but after test driving them, they found most of them starts blowing only hot air

Oh! And they haven't received their first deposited car. Basically the trucks are just grabbing whatever they see at port lol
Spoke with Lotus NJ yesterday. My car was on the 4/6 ship but hasn't arrived at the dealer yet. I'm told at least three cars that arrived have needed new power steering pumps already, one needed new brake pads, and he said a few have had AC issues. I'm glad they are doing thorough PDIs before delivering the cars but I really hope my car makes it to the dealer soon.
 
Spoke to Boardwalk, they have 16 Emiras currently and 5 more coming in today. More than half of them have A/C issue not blowing cold. They now have 20 resistors ordered from Lotus to replace them.

They would initially blow cold but after test driving them, they found most of them starts blowing only hot air

Oh! And they haven't received their first deposited car. Basically the trucks are just grabbing whatever they see at port lol
Hmm, I wonder what resistors they are replacing? Cooling and then stopping sounds like a compressor or A/C system charge issue. There are resistors in the fan speed system, but that is not directly related to the actual A/C cooling apparatus.
 
Hmm, I wonder what resistors they are replacing? Cooling and then stopping sounds like a compressor or A/C system charge issue. There are resistors in the fan speed system, but that is not directly related to the actual A/C cooling apparatus.
Not sure either and don't think it's a permanent fix. I am told that resistor is placed just under the dashboard.
 
Well, looks like I'll be joining the club earlier than I expected. Boardwalk just offered me an orphaned FE 1.0 in the exact spec that I was going to use for my final V6 run order. They'll let me get out of my already spec'ed I4 (due March 25) and change my deposit for the Final V6 run to an I4 in 2028 so I said YES.

 
Last edited:
Well, looks like I'll be joining the club earlier than I expected. Boardwalk just offered me an orphaned 1st Ed in the exact spec that I was going to use for my final V6 run order. They'll let me get out of my already spec'ed I4 (due March 25) and change my deposit for the Final V6 run to an I4 in 2028 so I said YES.
That car's twin is available now at Bellevue, if anyone is interested.
 
Good news. I just got the call that my car is on a truck headed to California. 4/6 ship. Hoping it will be ready for pickup maybe May 6th. He said 8 cars on their way to Eurocar in Orange County. Oct 2021 order. FE2.0. In their first shipment. Pinch me...
Do you know if Eurocar has received your car yet for PDI?
 

Create an account or login to comment

Join now to leave a comment enjoy browsing the site ad-free!

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top