What did you do to your Emira today?

Yep. Always planned on having both of the last ICE from Lotus. Just that it happened out of order. Original plan was to order the i4 since I missed the original FE 2..0 cutoff (before additional allocation after the last delay) and then get an end of production V6 manual in a few years. Then I chanced upon an orphaned FE 1.0 with the exact spec I wanted last May so I picked it up.
 
I began the project to install insulation in the doors. I took the door panel and inner door panel off and found this inspection sticker inside. It wasn't not attached very well so I'm happy I got it out.

1739658051780.webp
 
The performance shop that's done some of my installs wanted to test fit their Universal Aero Kit x 12mm spacer (prototype) on my Emira. It's carbon fiber and influenced by the Redbull RB19 wheels. They are still refining the final look, but it was fun doing something different.
View attachment 56761
View attachment 56763
Would you mind updating us on this development it's super cool, and which shop?
 
Finally got both cars together. The V6 is dirty from sitting at dealer service for a week.

IMG_8501.webp
IMG_8500.webp


I then installed the Magsafe phone mount/charger. did not take a pic but it's the same one I use on the V6

20240504_170118.webp


Since it's finally a warmer day. Came home, had lunch and gave the V6 a wash and cleaned the wheels.

IMG_8505.webp
IMG_8506.webp
 
I'm going to try a personalized design on my car which required a color match to Seneca Blue. I asked ChatGpt to find a vinyl wrap match and it was accurate.

Here's the wrap name and code incase this helps someone on here:

"3M 2080 Gloss Intense Blue Vinyl Wrap | G47"

1740350267401.webp
 
Oooof, I have the same valve stem covers - were given as a gift too, worried taking them off will not go over well.. o_O
I have them too, just make sure you loosen and re tighten them every time you clean the car, that should make sure they don't corrode (stick) onto the valve as that can be a real pain. Worst case scenario if they are corroding is to get a new set of Ebay, they're only a few quid (well mine were).
 
I've put an Emira badge in one of my seats.
I saw that someone had this on their car, maybe by mistake at the factory, and I quite liked the idea.
I'll see how it goes.
One minute job to swap over.

View attachment 60056
Huh - that's pretty cool! You going to put it on the driver seat too? I think the font difference would bother me.
 
I've put an Emira badge in one of my seats.
I saw that someone had this on their car, maybe by mistake at the factory, and I quite liked the idea.
I'll see how it goes.
One minute job to swap over.

View attachment 60056
I had no idea there were 2 types. Mine says "LOTUS". Where did you get these? Are these from GRP or an option from factory?
 
I had no idea there were 2 types. Mine says "LOTUS". Where did you get these? Are these from GRP or an option from factory?
Chinese cars have Emira on the seats because they would have had to use Nyo Lotus and that's too long for the space. I ordered them through my Lotus dealer.


Emira Seat Plaque.webp
 
Last edited:
Chinese cars have Emira on the seats because they would have had to use Nyo Lotus and that's too long for the space. I ordered them through my Lotus dealer.


View attachment 60070
Thank you
Found them here in the US

Says $25.99 per and should be ordered in pairs. I see your order came as a pair
Almost cheaper to order from UK
 

Create an account or login to comment

Join now to leave a comment enjoy browsing the site ad-free!

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Aerie Performance Lotus Emira Carbon Fiber Parts GregsRaceParts.com BanC Tech JUBU Performance Jon Seal Sportscars

Latest posts

Back
Top