JimH
Emira Fiend
I'm not sure how they'd attach to a plastic car.....Does anyone make magnetic stone guards? I have them along with arch guards on my Porsche and they are extremely helpful.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I'm not sure how they'd attach to a plastic car.....Does anyone make magnetic stone guards? I have them along with arch guards on my Porsche and they are extremely helpful.
Oh, lol. Completely forgot about that.I'm not sure how they'd attach to a plastic car.....
is your suggestion about using magnets is because you don't want to drill into your wheel liner? I would like be interested in making some for the community and will take in any suggestions on what they want to see out of a set of rock guards.Does anyone make magnetic stone guards? I have them along with arch guards on my Porsche and they are extremely helpful.
I would be in for a set of 4.. Keep me in the loop.is your suggestion about using magnets is because you don't want to drill into your wheel liner? I would like be interested in making some for the community and will take in any suggestions on what they want to see out of a set of rock guards.
View attachment 47700
You could always PPF them in black gloss.I asked about the black ones and they have only CF
Dang. Just ordered a set of carbon fiber ones last week.Automotive passion They have gloss black arch guards. I had carbon fiber ones before, but I think the black ones fit my car better because I'm not planning to do any carbon on my car.
Just installed them and here you guys have a few pics.
Carbon one slightly used I have set for sale if you're interested hit me up!
View attachment 48129View attachment 48130View attachment 48131View attachment 48132View attachment 48133![]()
LOTUS EMIRA ARCH GUARDS/MUDFLAPS
Stone chips can cause unsightly damage to your car. Give your Lotus Emira paintwork the protection it deserves.automotivepassion.net
The one I have you can adjust to the sides they have more than enough of protectionI would prefer the extended ones for better protection personally. I am ok with a solution that requires drilling.
Let me know if you want any additional feedback. For me I want the most protection as I don't think that the bigger version would detract from the looks of the car.
Thanks
Ryan G
I also didn't like the look of the CF ones, but thanks. I def want the plain black.The one I have you can adjust to the sides they have more than enough of protection
So I don't really intend to offend anyone here, but I couldn't contain myself when I saw the renderings and offerings so far for the so called Emira mud flaps. I know that it's only my opinion, but as such, I have to be brutally honest in saying that I really don't get the point of slapping a thin cheap looking plastic sheet on a such a beautiful fender.I'm not sure how they'd attach to a plastic car.....
From what I learn, 3D filament is not as durable for outdoor use; though I have seen some people make them anyway. Also the nature of filament-style printing, you see a lot of textures that can easily catch dirt unless it gets body filled and sanded to remove the pits. It isn't as economical to make them and then compete with the cheaper price that injection mold factories can produce out of China that can be sold at a dime a dozen via Amazon dropship. We can consider 3D resin print, but resin in itself is not cost effective either for this size of a print.So I don't really intend to offend anyone here, but I couldn't contain myself when I saw the renderings and offerings so far for the so called Emira mud flaps. I know that it's only my opinion, but as such, I have to be brutally honest in saying that I really don't get the point of slapping a thin cheap looking plastic sheet on a such a beautiful fender.
Like everyone else here, I too would prefer to protect and keep my Emira as clean as possible, but certainly not at the expense of making it look like a Semi. Having said this, there are many tastefully integrated OEM-looking mud guards in other sports cars out there and, I might add, with a more sturdy design. Take the 911 as an example, mine came with these (see picture below) from factory. While barely noticeable, they are damn effective in deterring the elements and they are so discrete that I even forget that they are there (except of course now that I started noticing them). Also, they are so well integrated in to the lower fenders that they don't interfere or spoil the lines of the car. With the facility of 3D printing these days, it can't be that hard to design and produce that type of mud guard for the Emira as well.
Just an opinion and please interpret this, as it's intended, a constructive suggestion.
I do appreciate that some folks don't mind a drilled solution. I will certainly help me achieve my standard goal with making the height as tall as I believe gives the most protection (usually about 18"). I can DM you if you're interested in being my beta tester. I would love to use the Emira that is in my photos, but I had the kindness of a PPF shop owner to allow me to get close to this car after it was delivered from a dealership. If anybody else wants to DM me as a mean to show your interest, please feel free to do so. It'll motivate me to get them finalized as soon as I can. Have a good eveningI would prefer the extended ones for better protection personally. I am ok with a solution that requires drilling.
Let me know if you want any additional feedback. For me I want the most protection as I don't think that the bigger version would detract from the looks of the car.
Thanks
Ryan G
You say they match well with the side skirts, and it’s hard to tell from the picture, but are those flaps in gloss like the skirts or a matte black?Fitted a set of the Automotive Passion ones to my car. Look good I think and match the black side skirts.
View attachment 48395
They're gloss black.You say they match well with the side skirts, and it’s hard to tell from the picture, but are those flaps in gloss like the skirts or a matte black?
Happy to beta test.From what I learn, 3D filament is not as durable for outdoor use; though I have seen some people make them anyway. Also the nature of filament-style printing, you see a lot of textures that can easily catch dirt unless it gets body filled and sanded to remove the pits. It isn't as economical to make them and then compete with the cheaper price that injection mold factories can produce out of China that can be sold at a dime a dozen via Amazon dropship. We can consider 3D resin print, but resin in itself is not cost effective either for this size of a print.
View attachment 48231
I do appreciate that some folks don't mind a drilled solution. I will certainly help me achieve my standard goal with making the height as tall as I believe gives the most protection (usually about 18"). I can DM you if you're interested in being my beta tester. I would love to use the Emira that is in my photos, but I had the kindness of a PPF shop owner to allow me to get close to this car after it was delivered from a dealership. If anybody else wants to DM me as a mean to show your interest, please feel free to do so. It'll motivate me to get them finalized as soon as I can. Have a good evening
Thanks, they actually look pretty good. By any chance, did you consider, or is it even feasible, to install them by inserting/wedging them inside the black wheel arch liner and the fender ? If doable, I imagine they could be held in place more firmly and could look even more discrete in the wheel well.They're gloss black.
Not really feasible as there is a small lip at the edge of the wheel arch which hides the edge of the ach liner.Thanks, they actually look pretty good. By any chance, did you consider, or is it even feasible, to install them by inserting/wedging them inside the black wheel arch liner and the fender ? If doable, I imagine they could be held in place more firmly and could look even more discrete in the wheel well.
Yes, I had noticed and it's true for the front, but not so for the rear well liner. Even so, as relates to the front wheel well, that liner seems to be made of some sort of soft plastic/fiberglass material and a small channel could be cut to allow the mud guard bottom edge through. Coincidentally, I sent a message to the folks at Automotive Passion to get their input on this. I ordered a set, so I will probably give this Idea a shot, unless Automotive Passion comes back with a good reason not to. The uncertainty I have at this point is what exactly is behind that section of the liner, but it's easy to check beforehand anyway, since it can be sufficiently pulled out to check once the pop rivet plugs are removed. Will revert with my results later on.Not really feasible as there is a small lip at the edge of the wheel arch which hides the edge of the ach liner.